🕐 {{CALISMA_SAATLERI}}📞 +90 000 000 00 00
Zirconia Crowns Basics

How a dental crown is fitted, step by step

November 19, 2026 · ZCT Clinical Editorial
How a dental crown is fitted, step by step

Fitting a zirconia crown follows a clear sequence: the tooth is examined and scanned, shaped to make room for the crown, protected with a temporary while the laboratory makes the final crown, and then the finished crown is checked and cemented in place. Each step has a purpose, and knowing what happens at each one takes most of the worry out of the appointment. This article walks through the whole process in plain terms.

It is written for international patients who want to picture exactly what a crown visit involves before they travel. The same stages apply whether you are having one crown or several, though the timing stretches with the number of teeth. It is general information and does not replace a proper examination.

Step one: examination and digital scans

Everything starts with a careful look at the tooth and the teeth around it. The dentist checks for decay, cracks and the health of the gum, and usually takes an x-ray to see what is happening at the root. This is the point at which a crown is confirmed as the right treatment, or a gentler option is suggested instead.

Modern clinics then take a digital scan of the mouth, a quick and comfortable process that replaces the old tray of putty for many patients. The scan becomes the blueprint the crown is designed from. You can read what this visit involves in our guide to the crown consultation and scans.

The stages of fitting a crownAssessExamination, x-ray and digital scan of the toothPrepareThe tooth is shaped and an impression takenProtectA temporary crown covers the tooth meanwhileMakeThe laboratory mills the final zirconia crownFitThe bite is checked and the crown cemented
The stages of fitting a crown

Step two: preparing the tooth

With the area numbed by local anaesthetic, the dentist trims the tooth to a shape the crown can fit over. Enough of the outer surface is removed to leave room for the thickness of the ceramic, and any old filling or decay is cleared away at the same time. Zirconia allows a relatively conservative preparation, but some healthy structure is always removed, and that part does not grow back.

If the tooth has lost a great deal of structure, the dentist may build up a core first to give the crown a solid foundation. This stage is usually painless thanks to the anaesthetic, feeling much like having a filling done. Our article on how much tooth is reduced explains the amounts involved.

Step three: taking the impression

Once the tooth is shaped, the dentist records its exact form so the laboratory can make a crown that fits precisely. This is done either with a digital scan or with a soft impression material that sets in a couple of minutes. A record of the opposing teeth and the way they meet is taken too, so the finished crown bites correctly.

Choosing the shade also happens here. The dentist matches the crown to the colour of your natural teeth, often in daylight, so it will blend in. Getting this right is what separates a crown that disappears from one that stands out, as our guide to choosing the right shade describes.

Step four: the temporary crown

While the permanent crown is being made, a temporary one protects the prepared tooth. It keeps the tooth comfortable, stops it drifting, and lets you eat and smile in the meantime. Temporaries are held with a soft cement so they can be removed easily later, which means they are not as strong as the final crown.

Because of that, it is wise to chew carefully on the other side and avoid very sticky foods until the real crown is fitted. If a temporary comes loose, it is easily re-seated and nothing is lost. Our article on what to expect from a temporary crown covers this stage.

Looking after a temporary crownChew on the opposite side where you canGo gently with sticky or very hard foodsClean around it carefully, sliding floss out sidewaysRe-seat it and call the clinic if it comes looseExpect a little sensitivity until the final fit
Looking after a temporary crown

Step five: making the zirconia crown

Away from the chair, the laboratory turns the scan or impression into the finished crown. A block of zirconia is milled by a computer-guided machine into the precise shape designed for your tooth, then finished, glazed and, for front teeth, often layered with porcelain for extra lifelike colour. The ceramic is fired at high temperature so it reaches full strength.

This stage is where the quality of the laboratory really tells, in the fit at the margin and the natural look of the surface. For patients treated abroad it is usually completed within the same trip. Our article on how zirconia crowns are made goes behind the scenes.

Step six: fitting and checking the bite

At the fitting visit the temporary is removed and the new crown is tried in without cement first. The dentist checks that it sits flush at the gum, that the contact with the neighbouring teeth is right, and that it looks correct against your other teeth. You are usually shown it in a mirror before anything is fixed.

The bite is then checked with marking paper and adjusted until the crown meets the opposing teeth evenly. Getting this right protects both the crown and the tooth beneath it from uneven strain. Our guide to how your bite is checked explains why this matters so much.

Step seven: cementing the crown

Once dentist and patient are happy, the crown is cemented permanently onto the prepared tooth. The surfaces are cleaned and dried, the cement is applied, the crown is seated firmly, and any excess is removed, especially from around the gum where leftover cement could cause irritation. The cement sets within minutes.

From that moment the crown is a fixed part of your bite. The dentist will give simple advice for the first day or two and confirm what to watch for. This is also when any final polish is done so the surface is smooth and kind to the teeth it bites against.

After the crown is fitted

Most people get used to a new crown within a few days. Mild sensitivity to temperature is common at first and usually fades; if the bite feels high, or discomfort lingers, a quick adjustment generally settles it. None of this should be alarming, but it is always worth reporting rather than enduring.

From there, a crown is cared for much like a natural tooth: brush, clean between the teeth and keep up regular check-ups so the margin stays healthy. If you grind your teeth, a night guard is a sensible safeguard. Our guides on caring for crowns and managing sensitivity cover the first weeks.

Plan your crown treatment with Zirconia Crowns Turkey

Knowing the steps makes the appointment far less daunting, and it also helps you ask the right questions. Send us recent photographs and any x-rays you have, and we will outline honestly how many visits your case is likely to need and whether it can be done in one trip.

You will receive a written, itemised plan before committing to anything, so there are no surprises on the day. Reach our team on WhatsApp or through the contact page whenever suits you.

Related: Zirconia crowns in Turkey: the complete guide · The crown consultation and digital scans · How much tooth is reduced for a crown · How zirconia crowns are made · Temporary crowns: what to expect · Source: Crowns — NHS

Frequently asked questions

How many visits does a crown take?

Traditionally two: one to prepare the tooth and one to fit the crown, with the laboratory work in between. Clinics treating international patients usually arrange both within a single trip of several days.

Is preparing the tooth painful?

It is done under local anaesthetic, so you should feel pressure rather than pain, much like having a filling. Some tenderness afterwards is normal and settles quickly.

What holds the crown on?

A dental cement bonds the crown to the prepared tooth. Once set, the crown becomes a fixed part of your bite and should not move.

Can I eat normally with the temporary crown?

Mostly, but chew on the other side where you can and go gently with sticky or very hard foods, since the temporary is held with a softer cement so it can be removed later.

What if the bite feels wrong after fitting?

Tell the clinic. A crown that sits slightly high is easily adjusted, and doing so protects both the crown and the tooth beneath from uneven strain.

Last updated: 31 October 2026

Zirconia Crowns Basics kategorisinden devam edin